IMOU NVR Reset Guide: Easy Steps to Restore Default Settings
Introduction
In this comprehensive guide, we will walk you through the
process of resetting your IMOU Network Video Recorder (NVR). Whether you
remember your NVR password or need to perform a hard reset, we've got you
covered. Read on to discover two simple ways to restore your IMOU NVR to its
default settings.
Way 1: Reset with NVR Password
- Login
and Access Operations: Begin by logging into your NVR interface using
your credentials. Then, navigate to the "Operation" section.
- Select
System Maintenance: Within the Operation menu, locate and select
"System Maintenance." This is where you'll find options to
manage your NVR settings.
- Choose
Factory Default: Under System Maintenance, you'll have various
options. To reset your NVR, select "Default."
- Reset
Function or Factory Default: IMOU NVR offers the flexibility to reset
individual functions or perform a complete factory reset. Click
"Factory Default."
- Enter
NVR Password: To proceed with the factory reset, you'll need to enter
your NVR password as a security measure.
- Confirm
and Reboot: After entering the password, click "OK" to
initiate the factory default process. Your NVR will reboot automatically.
Allow a moment for the reboot to complete.
- Default
Status: Once the reboot is finished, your IMOU NVR will be restored to
its default settings.
Way 2: Hard Reset IMOU NVR
- Physical
Access: For a hard reset, you'll need to physically access your NVR.
Remove the cover to reveal the internal components.
- Locate
Reset Pins: Inside, you'll find a set of pins labeled
"Reset." These pins are not built-in buttons but are used to
trigger a reset.
- Short-Circuit
the Pins: To initiate a hard reset, use a small tool to short-circuit
the two reset pins. You can use a wire or a paperclip.
- Power
Connection: While holding the pins short-circuited, connect the power
source to your NVR.
- Hold
for 15 Seconds: Keep the pins short-circuited for about 15 seconds.
During this time, you might hear a long beep.
- Release
and Restart: After the beep, release the pins and wait for your NVR to
restart. The hard reset process has begun.
- Default
State: Once the NVR restarts, it will return to its default state.
Conclusion
Resetting your IMOU NVR is a straightforward process that
ensures your device returns to its default settings. Whether you choose the
method that requires your NVR password or the hard reset option, following
these steps will help you regain control over your NVR's configuration. Be sure
to consider the method that suits your situation best. Good luck with your IMOU
NVR reset journey, and don't hesitate to subscribe to our channel for more
helpful guides and tutorials.
0 Comments