Ticker

6/recent/ticker-posts

Header Ads Widget

How to Reset ZKTECO F18 Admin Password

 How to remove Admin Password from ZKTeco F18 Fingerprint Access Control Device


F18 is an innovative biometric fingerprint reader for access control application. With high-performance firmware functions and compact design, it has become one of ZKTeco’s most popular devices. It is applied with ZKTeco’s latest firmware with user-friendly UI and flexible user privilege settings for multi-level management. The new hardware platform uses ZMM210 core-board with 1.2Ghz CPU. With optimization of both hardware platform and firmware, the new f18 is able to verify fingerprints with even higher efficiency. The device offers flexibility of both standalone installation and installation with any third-party access control panels which support standard Wiegand signal. TCP/IP and RS485 are also available which enable F18 to be applied in different network.

How to Reset Admin Password ZKTECO F18

  1. Power on the ZKTeco F18 Device
  2. Press and Hold the Tamper Switch
  3. Restart the Device while holding the Tamper Switch
  4. Once the Device Boots up, release the Tamper Switch
  5. Count 35-40 Seconds and Press the Menu Button
  6. Once in the Menu remove the Admin Account


Remove Admin for ZKTeco F18 Fingerprint Access Control
Remove Admin for ZKTeco F22 Fingerprint Access Control
Remove Admin for ZKTeco F28 Fingerprint Access Control
and Similar ZKTeco Fingerprint Access Control Devices with Tamper Switch.

In this Video you will be able to learn How to remove an Admin Password or Admin Fingerprint Privilege without the need to connect to the software. If you don't have the IP address or the communication key you will not be able to connect to the software.
Here we can use a simple and 100% working method. Just Follow these Simple instructions to Reset the Password for ZKTECO Access Controllers.





Post a Comment

1 Comments